550 10.8V-25V DC Motor 9/11/12/13/14/15 Teeth Engine Electric High Torque Gearbox 18V | 21v,13Teeth (9.2mm)

servo motorMotorsdescribe550 Electric Drill Motor 10.8 12V 14.4V 16.8V 18V 21V 25V Motor 9 11 12 13 14 15 Teeth Replacement DC Motor for Electric Screwdriver/Cordless Drill- The 550 is equipped with a 9-15 gear tooth DC motor and is designed for replacing rechargeable lithium battery cordless drill/screwdrivers.- Stainless steel shell material pure copper coil small current high efficiency and strong output power.- Low noise high speed and high torque good heat dissipation stable performance and long life.- Easy to use can be fixed with 2 M3 screws on the front.- Widely used in cordless drills bench drills electric drills electric screwdrivers etc.Support voltage: 10.8V / 12V / 14.4V / 16.8V / 18V / 21V / 25VSupported gear teeth: 9 / 11 / 12 / 13 / 14 / 15No-load speed: 20000-30000RPMRated power: 80W (approx.)Motor body length: 75.1mm; diameter: 37.2mmMotor shaft diameter: 3.2mm; length: 12mmMotor gear diameter: 7.9mm; thickness: 6.5mmMotor installation size: 2 M3 screws; spacing 25mmMotor operating temperature: 0 - 50°CMotor storage: Temperature: 0 - 40 degrees Celsius; Humidity: 15-90% RHHow to choose the motor for a cordless drill/screwdriver:1. Confirm that your motor model is 550 or the motor diameter (about 37.2mm) motor body length (about 57mm) and total length (about 75.1mm).2. Confirm your motor voltage (DC10.8V-25V) and choose a motor with the same or similar voltage.3. Confirm the number of teeth on your motor (9-15 teeth). Be sure to choose a motor with the same number of teeth and confirm whether the outer diameter and thickness of the gears are the same or similar.

• servo motor
• Motors